Author Topic: Ubuntu AOKex issues (Read 18826 times)

Zerovector · « **on:** November 15, 2006, 08:41:58 pm »

Allright, please laugh now. I hadn't remembered to edit both php.ini files (apache2 and cli), only apache2 one. But hey, thanks for replies & concern!

[2006-11-15 19:39:39] [LOGIN] [STATUS] Logging in
AOChat: not expecting login.

Hehe, this is going to be fun. At least there's lots of info here on the boards.

Naturalistic · « **Reply #1 on:** November 15, 2006, 08:43:47 pm »

Good luck with that, because I haven't been able to fix that problem on Ubuntu yet

Glarawyn · « **Reply #2 on:** November 15, 2006, 11:05:15 pm »

Quote from: Zerovector on November 15, 2006, 08:41:58 pm

[2006-11-15 19:39:39] [LOGIN] [STATUS] Logging in
AOChat: not expecting login.

On Ubuntu 6.01 this is fixable with the aokex module. You'll have to compile it youself, but it's not bad...

apt-get install php4-dev libgmp3-dev
(if you're using php5 change that to php5-dev)
Now to verify that you're not missing anything, do:
apt-get builddep php4 or apt-get builddep php5.

The builddep command installs everything needed to build the specified package(s) from source.

Now that you have a proper build environment, grab the aokex source from http://auno.org/dev/aochat/php-aokex-0.1.tar.gz. Follow the instructions for building aokex included in the tarball, and when you've successively compiled and installed add extension=aokex.so to /etc/phpX/cli/php.ini.

Zerovector · « **Reply #3 on:** November 16, 2006, 12:52:41 pm »

Many thanks, Glarawyn. However,

Code: [Select]

XXX@YYY:~$ apt-get builddep php4
E: Invalid operation builddep

I went onwards and aokex seems to work like a charm, but...

Code: [Select]

[2006-11-16 11:34:27]   [LOGIN] [STATUS]        Connecting
/usr/bin/php: symbol lookup error: /usr/lib/php4/20050606/aokex.so: undefined symbol: __gmp_set_memory_functions
[2006-11-16 11:34:27]   [LOGIN] [STATUS]        Authenticating
Using AOKex for login key generation

I read through the thread about AOChat not expecting login error, however I'm a bit unsure what's the problem here. GMP isn't working as intended, I presume?

/EDIT start:
Oh, I had missed this one:

Quote from: captainwinky on January 04, 2006, 09:33:52 am

okay, bit of success here (many thanks to my programmer brother )

i am not certain whether there is a small bug in the aokex makefile, or if in my noobness i missed a step, but a workaround for the undefined symbol error is, when doing 'make' in php-aokex, this:

make AOKEX_SHARED_LIBADD=-lgmp

my understanding of this is, unfortunately, not complete but i hope this information helps someone else.

looking forward to making good use of your great bot in my preferred OS,
CW.

I'll try that if it helps.
/EDIT end.

/edit2: Didn't seem to work.

Khalem · « **Reply #4 on:** November 16, 2006, 08:11:07 pm »

Undefined symbol is usually caused by missing libraries.

I don't have any experience with debian or debian based distros myself, but on RPM based distros you need to ensure that you install both gmp and gmp-devel packages. One contains the binaries/libraries while the other contains header files etc needed for compiling against the libraries.

Zerovector · « **Reply #5 on:** November 16, 2006, 08:28:25 pm »

Quote from: Khalem on November 16, 2006, 08:11:07 pm

Undefined symbol is usually caused by missing libraries.

I don't have any experience with debian or debian based distros myself, but on RPM based distros you need to ensure that you install both gmp and gmp-devel packages. One contains the binaries/libraries while the other contains header files etc needed for compiling against the libraries.

I checked synaptic and seems that I've got all the needed GMP libraries, too.

Khalem · « **Reply #6 on:** November 16, 2006, 08:30:12 pm »

Then i'm at a loss

Glarawyn · « **Reply #7 on:** November 16, 2006, 09:12:08 pm »

My bad, it's build-dep not builddep.

It works fine on my system, but maybe try ./configure --with-aokex=shared --with-gmp=/usr/lib/gmp

Zerovector · « **Reply #8 on:** November 16, 2006, 11:07:16 pm »

Quote from: Glarawyn on November 16, 2006, 09:12:08 pm

My bad, it's build-dep not builddep.

Thanks

Quote from: Glarawyn on November 16, 2006, 09:12:08 pm

It works fine on my system, but maybe try ./configure --with-aokex=shared --with-gmp=/usr/lib/gmp

And after that? configure, make, make install or? Heh, this is where my understanding (well, the feeble remnants of it) cease to exist. I tried to make and make install it again, but no dice.

Glarawyn · « **Reply #9 on:** November 16, 2006, 11:22:56 pm »

Try the ssl version?

apt-get install libssl-dev.

Start with a clean aokex source (remove the directory completely and extract from the tar.gz file)

Edit Makefile.in and replace aokex-gmp.c with aokex-openssl.c.

% phpize
% ./configure --with-aokex=shared
% make
% make install

Zerovector · « **Reply #10 on:** November 17, 2006, 12:11:25 am »

Again, thank you for your superb patience and knowledge so far, Glarawyn and Khalem

Code: [Select]

[2006-11-16 23:08:33]   [LOGIN] [STATUS]        Connecting
[2006-11-16 23:08:33]   [LOGIN] [STATUS]        Authenticating
Using AOKex for login key generation
[2006-11-16 23:08:34]   [LOGIN] [RESULT]        Error
[2006-11-16 23:08:34]   [LOGIN] [STATUS]        Logging in
AOChat: not expecting login.

At least it doesn't nag about undefined symbol anymore.

Zerovector · « **Reply #11 on:** November 17, 2006, 08:40:51 am »

Oh, and just now I noticed this thread is about bebot 31

Mine is 0.2.9.

Going to try and install it on my main computer (Windows XP, SP2) later today and see what happens.

Khalem · « **Reply #12 on:** November 17, 2006, 04:23:40 pm »

There should be no difference between the two versions in terms of the bot logging in however.

Zerovector · « **Reply #13 on:** November 17, 2006, 04:27:29 pm »

Oh well, I didn't get it working and today the HD in my ubuntu machine got fried

Working well on Windows now. Thank you all for the helpful tips!

Hurtig · « **Reply #14 on:** December 02, 2006, 01:49:20 am »

It looks like I'm walking down the same path as Zerovector with undefined symbols and unexpected logins with both GMP and OpenSSL.

I'm running Ubuntu 6.10 with PHP5.

So far I have tried compiling the GMP libraries from http://swox.com/gmp/ which gives me the undefined symbols error from within AOChat.php. I don't understand why aokex doesn't complain about this when I compile it against GMP...

I have tried installing the GMP libraries using the method described by Glarawyn and this gives me an unexpected login error.

I tried the OpenSSL solution too and this also gives me the unexpected login error.

Any ideas on where I should go from here?

I don't suppose it's possible to use a statically compiled version of aokex from another Ubuntu installation?