Author Topic: AoC and Patch 1.05 (Read 46578 times)

MysterF · « **Reply #30 on:** June 30, 2009, 12:37:30 pm »

works fine here...he can't emulate hundreds of setups and custom mods that some of us are running, so far works, from what I was reading in console ppl are chatting and using bot functions without issues.

Didn't had the chance to test and see if I can log in in and use bot in same time ...when I'm home I will probably do that also

Drizzurdeen · « **Reply #31 on:** June 30, 2009, 12:40:16 pm »

ok i don't get the bot running on my system ... tried it with vers. 0.6.2 an 0.6.3 both are not runnig ... they could connect to aochat server ... and yes i have done the source update with the new files ... but it don't work ... could be the problem that my bot is running under a linux system

Jiheld · « **Reply #32 on:** June 30, 2009, 02:15:07 pm »

http://forums-eu.ageofconan.com/showthread.php?p=1352368&posted=1#post1352368

hes working on it

Shakor · « **Reply #33 on:** June 30, 2009, 11:20:15 pm »

Can Any of the Bebot devs pleeease help Chaoz out? He has done a really good job atm implementing the new auth protocol.
Now if any of you could take his code and fix it so it works again as how it was working before the 1.0.5 patch?

Vulkor · « **Reply #34 on:** July 01, 2009, 04:33:59 am »

I get Connecting
Authenticating
Read Error: EOF
Error while reading rpc header. ()

Anyone have a clue, i backed up the old filed and replaced with his new ones from his link on the Euro forums.

snyder · « **Reply #35 on:** July 01, 2009, 10:14:11 am »

i think everyone gets that message, its not fatal for bot (i think, dont remember what error shows me)

and start bot when youre not online with your chars, you should have no problem then, atleast i dont have (with bot

)

but then, when bot is connected i need to try 5-10 times logging onto my chars, but thats not problem for me, i just want bot to work

Drizzurdeen · « **Reply #36 on:** July 01, 2009, 03:08:19 pm »

ok than pls pls pls tell me how u get your bot running

i have my bot in a linux area an he wouldn't start either log in ... i tried it with the v. 6.2 and 6.3 ... futher i tried all the ip's i could found ... nothing would get the bot running ... pls pls pls help ...

why this ist soo important for me ?? I CAN'T WITHOUT BEBOT

thx
Drizzurdeen

Vulkor · « **Reply #37 on:** July 01, 2009, 05:26:05 pm »

Quote from: Vulkor on July 01, 2009, 04:33:59 am

I get Connecting
Authenticating
Read Error: EOF
Error while reading rpc header. ()

Anyone have a clue, i backed up the old filed and replaced with his new ones from his link on the Euro forums.

Quote from: snyder on July 01, 2009, 10:14:11 am

i think everyone gets that message, its not fatal for bot (i think, dont remember what error shows me)

and start bot when youre not online with your chars, you should have no problem then, atleast i dont have (with bot )

but then, when bot is connected i need to try 5-10 times logging onto my chars, but thats not problem for me, i just want bot to work

I've tried this with my Character not being online. I waited nearly an hour to connect and it just barfed. Its been a bit since I set up the Bot. Don't I have to edit a config and change server IP or name or was that updated in the Server.php

Drizzurdeen · « **Reply #38 on:** July 02, 2009, 04:56:57 pm »

ok bot ist working fine by me ... but only under os: windows-server

but this could not be the workaround to switch on windows to get the bots working

... i would prefer that the bots will run under os: linux ...how they ever did

would be an possibility to get bots runing for aoc under linux with the new files for chat-logins

would be perfekt ...

thanks
Drizzurdeen

Morran · « **Reply #39 on:** July 02, 2009, 09:45:41 pm »

Quote from: Drizzurdeen on July 02, 2009, 04:56:57 pm

ok bot ist working fine by me ... but only under os: windows-server

try this AOChat.php. works on debian lenny arm.
http://www.file-upload.net/download-1739567/AOChat.zip.html

server: aoc-eu-um.live.ageofconan.com', 'port'=>7000

Bebot 6.3 on Mitra

Drizzurdeen · « **Reply #40 on:** July 03, 2009, 12:42:40 pm »

thanks a lot ... works prefekt with os: linux with the aochat.php file u postet ... further bebot 0.6.2 is running with the files ...

thx thx thx

drizzurdeen

Apollyon · « **Reply #41 on:** July 04, 2009, 05:00:56 am »

I downloaded the AOChat.php file that was linked and I get a different error now. Going to keep looking into it, but does anyone get a similar error or know what the problem is?

Code: [Select]

AOChat: Did not receive the serveraddress for the territorymanager.

Apollyon · « **Reply #42 on:** July 05, 2009, 06:49:23 pm »

I am still getting the error about the address for the territory manager. I have tried multiple things and end up with the same result. The last set of changes I followed was from this post on the EU forum. I thought this might be a firewall issue, but I believe all of the required ports are open now. I will list my system info and the result of my attempt to run in case anyone has any idea what is going on. Since I have not run this bot before, typically use what I create based on VhaBot, I don't know if this is a general setup issue or an issue due to the 1.05 changes.

BeBot: 0.6.3
OS: Linux
Kernel: 2.6.28-9.16
Architecture: x86_64
PHP: 5.2.9
MySQL: 5.0.75

Code: [Select]

MySQL database connection test successfull
Creating MySQL class!
Creating AOChat class!
Creating main Bot class!
MyBotName [MAIN] [DIR]   Loading main functions of the bot

...

MyBotName [MOD-CUSTOM]   [DIR]   Loading additional modules in directory custom/modules/


MyBotName [LOGIN]        [STATUS]        Connecting
MyBotName [LOGIN]        [STATUS]        Authenticating
AOChat: Did not receive the serveraddress for the territorymanager.

Shakor · « **Reply #43 on:** July 05, 2009, 07:03:32 pm »

Quote from: Apollyon on July 05, 2009, 06:49:23 pm

I am still getting the error about the address for the territory manager. I have tried multiple things and end up with the same result. The last set of changes I followed was from this post on the EU forum. I thought this might be a firewall issue, but I believe all of the required ports are open now. I will list my system info and the result of my attempt to run in case anyone has any idea what is going on. Since I have not run this bot before, typically use what I create based on VhaBot, I don't know if this is a general setup issue or an issue due to the 1.05 changes.

BeBot: 0.6.3
OS: Linux
Kernel: 2.6.28-9.16
Architecture: x86_64
PHP: 5.2.9
MySQL: 5.0.75

Code: [Select]
MySQL database connection test successfull Creating MySQL class! Creating AOChat class! Creating main Bot class! MyBotName [MAIN] [DIR] Loading main functions of the bot ... MyBotName [MOD-CUSTOM] [DIR] Loading additional modules in directory custom/modules/ MyBotName [LOGIN] [STATUS] Connecting MyBotName [LOGIN] [STATUS] Authenticating AOChat: Did not receive the serveraddress for the territorymanager.

You can fix that with: http://forums-eu.ageofconan.com/showpost.php?p=1353313&postcount=101

Replace: displayConanError( $chatServerPacket->args[0] ); in AOChat.php with:
$this->displayConanError( $chatServerPacket->args[0]);

Apollyon · « **Reply #44 on:** July 05, 2009, 07:10:48 pm »

I tried that and still get the same error.

Author Topic: AoC and Patch 1.05 (Read 46578 times)

MysterF

Re: AoC and Patch 1.05

Drizzurdeen

Re: AoC and Patch 1.05

Jiheld

Re: AoC and Patch 1.05

Shakor

Re: AoC and Patch 1.05

Vulkor

Re: AoC and Patch 1.05

snyder

Re: AoC and Patch 1.05

Drizzurdeen

Re: AoC and Patch 1.05

Vulkor

Re: AoC and Patch 1.05

Drizzurdeen

Re: AoC and Patch 1.05

Morran

Re: AoC and Patch 1.05

Drizzurdeen

Re: AoC and Patch 1.05

Apollyon

Re: AoC and Patch 1.05

Apollyon

Re: AoC and Patch 1.05

Shakor

Re: AoC and Patch 1.05

Apollyon

Re: AoC and Patch 1.05