What do I have to modify so bot will send a PM to whoever set the timer when timer goes off or when it is 1hr/30min/15min/5min left?

Slightly modified version of this, with the change that buff was asking about above.

Changes:
- sends the timer messages also in a /tell to the person who started the timer, along with pgroup and guild
- if the timer is started via a /tell, it ONLY responds back via a /tell with the timer alerts
- a few more ways of starting timers, it can now be started with any of the following:
timer hh:mm:ss note
timer hh:mm note
timer mm note

<?
$customTimers = new CustomTimers($bot);

$db -> query("CREATE TABLE IF NOT EXISTS `timers` (
`id` INT( 10 ) NOT NULL AUTO_INCREMENT ,
`setby` VARCHAR( 100 ) NOT NULL ,
`description` VARCHAR( 255 ) NOT NULL ,
`expires` INT( 11 ) NOT NULL ,
`tell` BOOLEAN ,
PRIMARY KEY ( `id` )
);"); 

$commands["tell"]["timer"] = &$customTimers;
$commands["pgmsg"]["timer"] = &$customTimers;
$commands["gc"]["timer"] = &$customTimers;
$commands["tell"]["timers"] = &$customTimers;
$commands["pgmsg"]["timers"] = &$customTimers;
$commands["gc"]["timers"] = &$customTimers;

$cron["2sec"][] = &$customTimers;


class CustomTimers
{
var $bot;
var $timers;
var $output;
var $date_format;

var $description_color;
var $time_color;
var $id_color;


function CustomTimers (&$bot)
{
$this -> bot = &$bot;

$this -> date_format = "G:i:s n/j/y";

$this -> description_color = "#31D6FF";//#FF3131
$this -> time_color = "#C6D6FF";
$this -> id_color = "#FFCC66";//white

$this -> load_timers();
}


function tell($name, $msg)
{
$this -> bot -> send_tell($name, $this -> process_command($name, $msg, 1));
}


function pgmsg($name, $msg)
{
$this -> bot -> send_pgroup($this -> process_command($name, $msg, 0));
}


function gc($name, $msg)
{
$this -> bot -> send_gc($this -> process_command($name, $msg, 0));
}


function process_command($name, $msg, $tell)
{
if (preg_match("/^" . $this -> bot -> commpre . "timer$/i", $msg))
return $this -> show_timers();
if (preg_match("/^" . $this -> bot -> commpre . "timers$/i", $msg))
return $this -> show_timers();
if (preg_match("/^" . $this -> bot -> commpre . "timer ([0-9]+)$/i", $msg, $info))
return $this -> show_timer($info[1]);
if (preg_match("/^" . $this -> bot -> commpre . "timer ([0-9][0-9]?):([0-9][0-9]?):([0-9][0-9]?) (.*)$/i", $msg, $info))
return $this -> set_timer($name, $info[1], $info[2], $info[3], $info[4], $tell);
if (preg_match("/^" . $this -> bot -> commpre . "timer ([0-9][0-9]?):([0-9][0-9]?) (.*)$/i", $msg, $info))
return $this -> set_timer($name, $info[1], $info[2], 0, $info[3], $tell);
if (preg_match("/^" . $this -> bot -> commpre . "timer ([0-9][0-9]?) (.*)$/i", $msg, $info))
return $this -> set_timer($name, 0, $info[1], 0, $info[2], $tell);
if (preg_match("/^" . $this -> bot -> commpre . "timer del ([0-9]+)$/i", $msg, $info))
return $this -> delete_timer($info[1]);
return "Invalid syntax. Please /tell <bot> !help !timer";
}


function set_timer($name, $hours, $minutes, $seconds, $description, $tell)
{
$stamp = gmmktime() + ($hours*60*60) + ($minutes*60) + $seconds;
$this -> bot -> db -> query("INSERT INTO " . $this -> bot -> get_tablename("timers") . " (setby, description, expires, tell) VALUES ('$name', '$description', $stamp, $tell)");
$this -> load_timers();
return "Timer set.";
}


function load_timers()
{
$this -> timers = $this -> bot -> db -> select("SELECT * FROM " . $this -> bot -> get_tablename("timers") . " WHERE expires > ".gmmktime()." ORDER BY id ASC");
$this -> update_output();
}


function delete_timer($id)
{
        $result = $this -> bot -> db -> select ("SELECT id FROM " . $this -> bot -> get_tablename("timers") . " WHERE id = $id");
        if (empty($result)) return "No timer with that ID.";
$this -> bot -> db -> query("DELETE FROM " . $this -> bot -> get_tablename("timers") . " WHERE id = $id");
$this -> load_timers();
return "Timer deleted.";
}


// keeps a list updated so we dont have to make one all the time
function update_output()
{
$description_color = $this -> description_color;
$time_color = $this -> time_color;
$id_color = $this -> id_color;
$output = "";
if (!empty($this -> timers)) {
foreach($this -> timers AS $timer)
{
$time = gmdate($this -> date_format, $timer[3]);
$output .= "\n\n<font color=$id_color>#$timer[0]  <font color=$description_color>$timer[2]  <font color=$time_color>$time</font></font></font>";
}
}
$this -> output = $output;
}


function show_timers()
{
if (empty($this -> output))
{
return "No timers set.";
}
else
{
$output = "<font color=CCInfoHeader>::::: TIMERS :::::\n" . $this -> output;
$output .= "\n\n\nTime now " . gmdate($this -> date_format, gmmktime());
return "Timers :: " . $this -> bot -> make_blob("click to view", $output);
}
}


function show_timer($id)
{
if (empty($this -> output))
{
return "Timer $id does not exist.";
}
else
{
$dcolor = $this -> description_color;
$tcolor = $this -> time_color;
        $result = $this -> bot -> db -> select ("SELECT * FROM " . $this -> bot -> get_tablename("timers") . " WHERE id = $id");
        if (empty($result)) return "Timer $id does not exist.";
$remain = $this -> format_seconds($result[0][3] - gmmktime());
$desc = $result[0][2];
return "Timer: <font color=$dcolor>$desc in <font color=$tcolor>$remain";
}
}


function format_seconds($totalsec)
{
$hours = floor( $totalsec / (60*60) );
$rest = $totalsec % (60*60);
$minutes = floor( $rest / 60 );
$seconds = $rest % 60;
return sprintf("%02d:%02d:%02d", $hours, $minutes, $seconds);
}


function cron()
{
if (empty($this -> timers)) return;

$dcolor = $this -> description_color;
$tcolor = $this -> time_color;
foreach($this -> timers AS $timer)
{
$secleft = $timer[3] - gmmktime();
if( $secleft <= 3600 && $secleft >= 3599 ) {
$msg = "Timer: <font color=$dcolor>$timer[2] in <font color=$tcolor>1 hour</font>!";
if($timer[4] == 0) {
$this -> bot -> send_pgroup($msg);
$this -> bot -> send_gc($msg);
}
$this -> bot -> send_tell($timer[1], $msg);
}
else if( $secleft <= 7200 && $secleft >= 7199 ) {
$msg = "Timer: <font color=$dcolor>$timer[2] in <font color=$tcolor>2 hours</font>!";
  if($timer[4] == 0) {
$this -> bot -> send_pgroup($msg);
$this -> bot -> send_gc($msg);
}
$this -> bot -> send_tell($timer[1], $msg);
}
else if( $secleft <= 1800 && $secleft >= 1799 ) {
$msg = "Timer: <font color=$dcolor>$timer[2] in <font color=$tcolor>30 minutes</font>!";
if($timer[4] == 0) {
$this -> bot -> send_pgroup($msg);
$this -> bot -> send_gc($msg);
}
$this -> bot -> send_tell($timer[1], $msg);
}
else if( $secleft <= 900 && $secleft >= 899 ) {
$msg = "Timer: <font color=$dcolor>$timer[2] in <font color=$tcolor>15 minutes</font>!";
if($timer[4] == 0) {
$this -> bot -> send_pgroup($msg);
$this -> bot -> send_gc($msg);
}
$this -> bot -> send_tell($timer[1], $msg);
}
else if( $secleft <= 300 && $secleft >= 299 ) {
$msg = "Timer: <font color=$dcolor>$timer[2] in <font color=$tcolor>5 minutes</font>!";
  if($timer[4] == 0) {
$this -> bot -> send_pgroup($msg);
$this -> bot -> send_gc($msg);
}
$this -> bot -> send_tell($timer[1], $msg);
}
else if( $secleft <= 1 ) {
$msg = "Timer: <font color=$dcolor>$timer[2] <font color=$tcolor>now</font>!";
if($timer[4] == 0) {
$this -> bot -> send_pgroup($msg);
$this -> bot -> send_gc($msg);
}
$this -> bot -> send_tell($timer[1], $msg);

$this -> bot -> db -> query("DELETE FROM " . $this -> bot -> get_tablename("timers") . " WHERE id = ".$timer[0]);
$this -> load_timers();
}
}
}


}
?>

gmmktime() is for when running PHP script on Servers with thier System Clocks set to GMT.
Hence the error in the time. Why the the PHP Group did it that way is beyond me when Time() is not Time Zone dependent.

Always use time() and date() for systems with thier time/date set to thier current physical time zone.
Use gmdate() to display the correct GMT Date/Time ingame with a local time() stamp.

$remaining_time = time() - $timer[3];

At least if my limited information is right.
The result will be the remaining seconds of that timer.

You could not just rewrite that portion of the file to get it to work that way. The update_output is only run when a timer is added or removed, not every second. If you were to rewrite it to put the seconds left in the list (not the time the timer expires), this would put a larger load on the bot, as it would have to requery the database every 2 seconds to find out all the timers, or it would have to be rewritten to generate the output for that section on the fly (which depending on how often people are checking may not be effeciant). Really, what you are asking is what the !timer <number> command is for.

have one idea if bee geed to add in replay blob can see after timers (examle: "#1  sdf  7:38:11 4/17/06") add left time in format (example Left Time: .:::days:hh:mm:ss:::.)
tink base in my very litle programer skill need add only one function and edit creation replay blob stile
Sotny

- updated to use Glarawyn's New Module Settings plugin (v2.0.3 or above required): configurable time alerts and output locations.
- switched to Europe time format.
- tidied up and expanded output slightly.
- for longer timers (2HR, 1HR, 30mins) it will send the complete timers information as well as alert.

PHP v1 (see below)
PHP v2 (see below)
HELP
HELP

PHP v1:
removed sending tells back to person who set timer.
added sending timers to selected admin group (ie. raidleader).
configuration with: !set Customtimers admingroup <group> required.

PHP v2:
will send timers back via tell to whoever set them (be that in GC, tell or pgroup).  I didn't test this version but it should work fine.  If not, I'll find out when I add it to org bot tomorrow

Obviously v1 is more suitable to a raidbot type setup due to spamming ability, whereas v2 is meant for normal guildbot.  You can't use both at the same time in case anyone tries

Cheers,

-jj-

ROFL, not much luck :-)

Ok, you need to do the following:-

Open bot.php, somewhere close to the bottom add the following code:-


function get_tablename($table)
{
return $table;
}


Updated both files to remove Zodsnet from the timer description :-)